Ageta Kft.

Ugrás a fő tartalomhoz »

Your shopping cart is empty

E973023

Legyen Ön az első, aki véleményt ír erről a termékről

Készleten: Készleten

Áfa nélkül: 5937,75Ft Áfával: 7540,94Ft

  • 64 db-tól: 5513,63Ft (7002,31Ft áfával) /db , a kedvezmény 8%
  • 128 db-tól: 5089,50Ft (6463,67Ft áfával) /db , a kedvezmény 15%


Vagy

Gyors áttekintés

ERmet ZD male 180pin 4pair

E973023

Kattintson duplán a képre, a teljes méret megtekintéséhez

Kicsinyít
Nagyít

További képek

Részletek

ERmet ZD connectors were developed for differential high-speed signal transmission in telecom applications with data rates of up to 10 Gbits/sec.

This robust, high quality modular connector system is just as wellsuited for use in conjunction with the 2mm HM (IED 61076-4-101) ERmet line of connectors.

Features
  • Design: Wafers with individually shielded pairs of contacts
  • Contacts: Low noise, dual beam, leaf contacts with one ground blade for every pair of signals
  • Wafer pitch: 2.5 mm from wafer to Wafer
  • Pitch between signal pins: 1.5 mm between pairs (within wafer)
  • Pitch between pairs: 4.5 mm (within wafer)
  • Ground arrangement: In line with signals at termination and surrounding shield
  • Multiline Crosstalk < 3% at 100 PS
  • Differential Impedance: 100 Ω ±10%
  • Power Modules: Closed entry, vertical female backplane modules with stamped blades
  • Alignment Features: Improved pre-alignment guide and polarizing features, 4 rigid blades for all modules

The 4 pair ERmet ZD male connectors provides in the 10 wafer version 40 contact pairs (80 Signal contacts and 40 ground contacts). The L-shaped shields are robust mechanical structures that provide an ideal differential evironment as well as protecting the signal pins ad resisting deflection that could cause stubbing.

Termination Pressfit

Specification:
right angle male0.5 ľm SnPb over 1.27 ľm Ni
Temperature range:-55 °C to +125 °C
Ampacity:IEC60512 test 5bat 20 °C 0.9 A
at 70 °C 0.7 A
at 100 °C 0.4 A
Dielectric strength:IEC 60512 test 4aContact - Contact 500 V eff
Contact resistance:IEC 60512 test 2a< 50 mΩ
Insulation resistance:IEC 60512 test 3a> 104
Mechanical operating life:IEC 60512 test 9a> 250 mating cycles
Process-conditions:
Press-in force:36 N/Pin
Materials:
Housing:LCP
UL flame protection:UL 94 V-0
UL file:E83005
Contact and mating area:
Base material:Copper alloy
Plating:min. 0.65 ľm PdNi + 0,1 ľm Au over 2-3 ľm Ni
right angle male0.86 ľm Au over 1.27 ľm Ni
Termination area:
Base material:Copper alloy
Plating:0.5-2 ľm Sn matt over 2-3 ľm Ni
Item:Description:No. of contacts:Configuration:Tail Length:
E9730234 pair / 15 wafer18060 pairs - 120 signals / 60 grounds3.7 mm

További információk

Minimálisan rendelhető mennyiség 32.0000
Gyártó ERNI Electronics

Termék címkék

Használjon szünetet a címkék elválasztásához. Használja az aposztróf jelet (') kifejezésekhez.